Growing up, Luke Parker played sports.…

The Showcase celebrity golf tournament attracts big-time athletes and pop stars each year.…

[IMAGE-1] Midtown Coeur d'Alene. The pedestrian-friendly strip of restaurants and shops that runs north-south along Fourth Street in between Garden and Harrison avenues.…

Mosey on up to the bar at Lil Sumthin' Saloon for a sip of Southern hospitality by way of Texas, and a samplin' of some old-fashioned country vibes.…

Weeks after being raped at a wedding — an experience already wrapped in feelings of self-blame and fear — the 18-year-old Eastern Washington University student realized something else was wrong.…

The Cannabis Issue Like the best gas station treats that tempt even the most mature adults on a good road trip, gummies cater to that need to chew on something sweet while basking in the sunshine.…

The new documentary Circus of Books is predicated on an intriguing and admittedly amusing bit of cognitive dissonance: One of Los Angeles' premier adult emporiums was, for decades, operated by a buttoned-up, middle-aged Jewish couple, who kept the true nature of their jobs hidden from even their closest acquaintances.…

When Washington Gov. Jay Inslee solemnly looked into the camera on Friday, May 1, he wasn't ready to declare victory yet.…

Last week, the New York Times dropped a terrifying story: Asian Giant Hornets, or "murder hornets" as more J. Jonah Jameson-esque researchers like to call them, have been identified in Western Washington. These insects can grow up to 2 inches long, can rip the heads off an entire hive of honeybees in a matter of hours, and have dagger-like stingers that pierce beekeeper suits to deliver a sting that sears like molten acid.…

A modeling framework for evaluating the impact of weather conditions on farming and harvest operations applies real-time, field-level weather data and forecasts of meteorological and climatological conditions together with user-provided and/or observed feedback of a present state of a harvest-related condition to agronomic models and to generate a plurality of harvest advisory outputs for precision agriculture. A harvest advisory model simulates and predicts the impacts of this weather information and user-provided and/or observed feedback in one or more physical, empirical, or artificial intelligence models of precision agriculture to analyze crops, plants, soils, and resulting agricultural commodities, and provides harvest advisory outputs to a diagnostic support tool for users to enhance farming and harvest decision-making, whether by providing pre-, post-, or in situ-harvest operations and crop analyzes.

A method for performing relational analysis of parsed input is employed to create a visual map of knowledge information. A title, header or subject line for an input item of information is parsed into syntactical components of at least a subject component and any predicate component(s) relationally linked as topic and subtopics. A search of topics and subtopics is carried out for each parsed component. If a match is found, then the parsed component is taken as a chosen topic/subtopic label. If no match is found, then the parsed component is formatted as a new entry in the knowledge map. A translation function for translating topics and subtopics from an original language into one or more target languages is enabled by user request or indicated user preference for display on a generated visual map of knowledge information.

Provided are a method, computer program product, and system for generating a recommendation for transfer of ownership of content. At least one characteristic of a first owner is determined. At least one characteristic of the content is determined. A second owner for the content is determined based on the at least one characteristic of the first owner, and the at least one content characteristic. The recommendation for transfer of ownership is generated, based at least in part on the determination of the second owner.

Embodiments are described for a system and method of providing a data miner that decouples the analytic flow solution components from the data source. An analytic-flow solution then couples with the target data source through a simple set of data source connector, table and transformation objects, to perform the requisite analytic flow function. As a result, the analytic-flow solution needs to be designed only once and can be re-used across multiple target data sources. The analytic flow can be modified and updated at one place and then deployed for use on various different target data sources.

A method for producing a high viscosity, low volatiles blown stripped oil blend is provided. The method may include the steps of: (i) obtaining an oil blend of corn stillage oil and soybean oil having a weight ratio of corn stillage oil to soybean oil of from about 1:2 to 3:1; (ii) heating the oil blend to at least 90° C.; (iii) passing air through the heated oil blend to produce a blown oil having a viscosity of at least 50 cSt at 40° C.; and (iv) stripping the blown oil from step (iii) to reduce an acid value of the blown oil to less than 5.0 mg KOH/gram.

A method for producing fatty acid alkyl esters from biolipids through transesterification and/or esterification reactions uses a flow-through cavitation device for generating cavitation bubbles in a fluidic reaction medium. The fluidic medium is passed through sequential compartments in the cavitation device having varying diameters and inner surface features to create localized reductions in fluid pressure thus vaporizing volatile alcohols and creating an increased surface area and optimized conditions for the reaction to occur at the gas-liquid interface around the bubbles.

Polyamide molding materials for transparent molding parts. The materials comprise transparent copolyamides that contain: (A) 40 to 100 wt % of at least one transparent copolyamide with a glass transition temperature (Tg) of at least 80° C. and not more than 150° C., composed of at least two diamines that are different from each other, wherein the at least two diamines are a mixture of (a) 50 to 90 mol % bis-(4-amino-3-methylcyclohexyl)methane (MACM) and/or bis-(4-amino-3-ethylcyclohexyl)methane (EACM) and/or bis-(4-amino-3,5-dimethylcyclohexyl)methane (TMACM) and b) 10 to 50 mol % aliphatic diamine having 9 to 14 carbon atoms, in particular decandiamine, particularly preferably at least 20 mol % decandiamine, each relative to the total amount of diamines, and of one or more aliphatic dicarboxylic acids, having 6 to 36 carbon atoms, (B) 0 to 60 wt % of at least one further polymer, (C) 0 to 10 wt % of additives, the sum of the components (A), (B) and (C) totaling 100% by weight.

Formulations comprising an isosorbide-modified unsaturated polyester comprising maleic acid, fumaric acid, itaconic acid or maleic anhydride and isosorbide and one or more low profile additives. The formulations exhibit better shrink control in molding compound formulations with standard low profile additives than their non-isosorbide-modified analogues. These isosorbide-modified unsaturated polyester resins may be applied in molding compounds like sheet molding compounds or bulk molding compounds and may be components of fiber reinforced composites or other composite materials.

The present invention relates to a solid composition containing calcium silicate hydrate and at least one water-swellable polymer which can form a hydrogel, and also to a process for preparing the composition, to the use thereof as a setting accelerator, and as a grinding aid in cement production. It also relates to building material mixtures which comprise the compositions.

The invention relates to glasses for use in solid laser applications, particularly short-pulsed, high peak power laser applications. In particular, the invention relates to a method for broadening the emission bandwidth of rare earth ions used as lasing ions in solid laser glass mediums, especially phosphate-based glass compositions, using Nd and Yb as co-dopants. The invention further relates to a laser system using a Nd-doped and Yb-doped phosphate laser glass, and a method of generating a laser beam pulse using such a laser system.

The invention relates to powder comprising at least one element M, at least one element A and at least one element X, in the respective proportions (n+1±ε1), 1±ε2 and n±ε3, in which: A is chosen from Cd, Al, Ga, In, Tl, Si, Ge, Sn, Pb, P, As and S;M is a transition metal;X is chosen from B, C and N;n is an integer equal to 1, 2 or 3; andε1, ε2 and ε3 independently represent a number ranging from 0 to 0.2, said powder having a mean particle size of less than 500 nm.

The invention is directed to a pulverulent compound of the formula NiaM1bM2cOx(OH)y where M1 is at least one element selected from the group consisting of Fe, Co, Zn, Cu and mixtures thereof, M2 is at least one element selected from the group consisting of Mn, Al, Cr, B, Mg, Ca, Sr, Ba, Si and mixtures thereof, 0.3≦a≦0.83, 0.1≦b≦0.5, 0.01≦c≦0.5, 0.01≦x≦0.99 and 1.01≦y≦1.99, wherein the ratio of tapped density measured in accordance with ASTM B 527 to the D50 of the particle size distribution measured in accordance with ASTM B 822 is at least 0.2 g/cm3·μm. The invention is also directed to a method for the production of the pulverulent compound and the use as a precursor material for producing lithium compounds for use in lithium secondary batteries.

The invention relates to a granulated powder intended, in particular, for the production of ceramic sintered parts, said powder having the following chemical weight composition, based on dry matter, namely: a zirconia stabiliser selected from the group containing Y2O3, Sc2O3, MgO, CaO, CeO2, and mixtures thereof, the weight content of stabiliser, based on the total zirconia and stabiliser content, being between 2% and 20% and the MgO+CaO content being less than 5% based on the total zirconia and stabiliser content; at least 1% of a first binder having a glass transition temperature less than or equal to 25° C.; 0-4% of an additional binder having a glass transition temperature greater than 25° C.; 5-50% alumina; 0-4% of a temporary additive different from the first binder and the additional binder, the total content of the first binder, the additional binder and the temporary additive being less than 9%; less than 2% impurities; and ZrO2 to make up 100%. According to the invention, the median diameter D50 of the powder is between 80 and 130 μm, the percentile D99.5 is less than 500 μm and the relative density of the granules is between 30% and 60%.

A process is presented for the increasing the yields of aromatics from reforming a hydrocarbon feedstream. The process includes splitting a naphtha feedstream into a light hydrocarbon stream, and a heavier stream having a relatively rich concentration of naphthenes. The heavy stream is reformed to convert the naphthenes to aromatics and the resulting product stream is further reformed with the light hydrocarbon stream to increase the aromatics yields. The catalyst is passed through the reactors in a sequential manner.

The instant invention provides for novel cationic lipids that can be used in combination with other lipid components such as cholesterol and PEG-lipids to form lipid nanoparticles with oligonucleotides. It is an object of the instant invention to provide a cationic lipid scaffold that demonstrates enhanced efficacy along with lower liver toxicity as a result of lower lipid levels in the liver. The present invention employs low molecular weight cationic lipids with one short lipid chain to enhance the efficiency and tolerability of in vivo delivery of siRNA.

A method of creating a semiconductor device is disclosed. An end of a carbon nanotube is unzipped to provide a substantially flat surface. A contact of the semiconductor device is formed. The substantially flat surface of the carbon nanotube is coupled to the contact to create the semiconductor device. An energy gap in the unzipped end of the carbon nanotube may be less than an energy gap in a region of the carbon nanotube outside of the unzipped end region.

Device for forming, on a nanowire made of a semiconductor, an alloy of this semiconductor with a metal or metalloid by bringing this nanowire into contact with electrically conductive metal or metalloid probes and Joule heating the nanowire at the points of contact with the probes so as to form an alloy such as a silicide. Application to the production of controlled-channel-length metal-silicide transistors.

A process for the production of nanocrystals or amorphous nanoparticles of actives (nanomaterials), especially from the peels of grapes. A dispersion of a micrometer-sized material in a solution of surfactant or a steric stabilizer is first provided. The macrosuspension is then stirred for at least 1 minute at a rotational speed above 500 rpm using a rotor-stator mixer. The stirred mixture is passed through a jet stream or piston-gas type high pressure homogenizer. The nanomaterials produced can be incorporated into formulations for use as nutraceutical, nutritional supplement, or as supportive treatment in medical therapy. The active can be derived from the peels of grapes.

A molding composition formulation includes a thermoset cross-linkable 12 to 45 micron polymeric resin. Hollow glass microspheroids are present from 2 to 12 total weight percent. An article formed from such a composition is further strengthened by the addition of a surface activating agent bonded to the surface of the glass microspheroids. Conventional particulate fillers when added to an inventive formulation provide enhanced performance when the filler particle has a size sufficiently small to insert within adjacent microspheroid interstitial voids. An unsaturated polyester resin so formed is particularly well suited for the formation of sheet molding compound formulations.

Provided is a thermosetting resin composition including an inorganic filler and a thermosetting resin matrix component, in which the inorganic filler includes secondary sintered particles each formed of primary particles of scaly boron nitride, and at least some of the secondary sintered particles each have a maximum cavity diameter of 5 μm to 80 μm. The thermosetting resin composition can be used for providing a heat conductive sheet in which electrical insulation property is kept by controlling where the defects such as voids and cracks occur and their size, and which has excellent heat conductivity.

Method of extracting syngas between the zone in a furnace where oxygen-starved combustion of biomass occurs and the zone in the furnace where secondary air is added to complete combustion, conditioning and cleaning the extracted syngas, and delivering it in a metered amount to the oxidizer or upstream of the oxidizer to reduce or eliminate the need for additional fossil fuels once the oxidizer has achieved its operating temperature. The gasifier or furnace burns solid waste and produces a syngas containing relatively high levels of CO, which is extracted from the furnace, conditioned, and introduced into an RTO as a fuel source. In certain embodiments, no extraction of syngas from the furnace takes place; the furnace conditions are manipulated so that normally undesirable levels of CO and other VOC's remain in the process stream. The heat from the furnace is used as intended (e.g., to heat a dryer), the stream is conditioned, and ultimately proceeds to a downstream RTO. Since the gas stream remains rich in CO and VOC's, its fuel value in the RTO is substantially higher than otherwise would be the case.

A barrel shifter uses a sign magnitude to 2's complement converter to generate decoder signals for its cascaded multiplexer selectors. The sign input receives the shift direction and the magnitude input receives the shift amount. The sign magnitude to 2's complement converter computes an output result as a 2's complement of the shift amount using the shift direction as a sign input, assigns a first portion (most significant bit half) of the output result to a first decoder signal, and assigns a second portion (least significant bit half) of the output result to a second decoder signal. This encoding scheme allows the decoder circuits to be relatively simple, for example, 3-to-8 decoders for an implementation adapted to shift a 64-bit operand value rather than the 4-to-9 decoder required in a conventional barrel shifter, leading to faster operation, less area, and reduced power consumption.

A random number generation method and apparatus using a low-power microprocessor is provided. In the random number generation method, a low-power microprocessor determines whether external power is supplied to a random number generator. The low-power microprocessor updates an internal state of the random number generator based on a first scheme if it is determined that the external power is supplied to the random number generator. The low-power microprocessor updates the internal state of the random number generator based on a second scheme different from the first scheme if it is determined that the external power is not supplied to the random number generator.

In this application, a set of orthogonal functions is introduced whose power spectral densities are all rectangular shape. To find the orthogonal function set, it was considered that their spectrums (Fourier transforms of the functions) are either real-valued or imaginary-valued, which are corresponding to even and odd real-valued time domain signals, respectively. The time domain functions are all considered real-valued because they are actually physical signals. The shape of the power spectral densities of the signals are rectangular thus, the Haar orthogonal function set can be employed in the frequency domain to decompose them to several orthogonal functions. Based on the inverse Fourier transform of the Haar orthogonal functions, the time domain functions with rectangular power spectral densities can be determined. This is equivalent to finding the time-domain functions by taking the inverse Fourier transform of the frequency domain Walsh functions. The obtained functions are sampled and truncated to generate finite-length discrete signals. Truncation destroys the orthogonality of the signals. The Singular Value Decomposition method is used to restore the orthogonality of the truncated discrete signals.

A method of frequency-domain filtering is provided that includes a plurality of filters, the plurality of filters including at least one constrained filter(s) W=I, I and at least one unconstrained filter(s) W=1,K− The method includes cascading the W k=i,K unconstrained filter(s). A single constraint window C is applied to the cascaded W=i,K unconstrained filter(s). The W=1,I constrained filter(s) are cascaded with the constrained cascaded Wk=1,K unconstrained filter(s) to form a resulting filter Wll=C(W 1{circle around (x)} . . . {circle around (x)} W){circle around (x)} W . . . W. The frequency domain representation of the single constraint window C may be based, at least in part, on a time domain representation of a single constraint window C that has been circularly shifted such that the frequency domain representation of the constraint window matches a property of the frequency domain representation of the cascaded W=1,K unconstrained filters.

3-Esters and 3-amides of thioxanthone bearing alkyl chains of appropriate length and can be used as photoinitiators or sensitizers in photopolymerizable systems, in particular for the preparation of coatings compatible with the food use.

The present invention provides a process for producing electret fine particles or coarse powder that can be uniformly electrified and exhibits excellent electrophoretic properties. Specifically, the present invention relates to the production processes (1) and (2) below:(1) A process for producing electret fine particles, comprising emulsifying a fluorine-containing material that contains a vinylidene fluoride-hexafluoropropylene-tetrafluoroethylene terpolymer in a liquid that is incompatible with the fluorine-containing material to obtain emulsified particles; and subjecting the emulsified particles to electron ray irradiation, radial ray irradiation, or corona discharge treatment.(2) A process for producing electret coarse powder, comprising subjecting a resin sheet containing a vinylidene fluoride-hexafluoropropylene-tetrafluoroethylene terpolymer to electron ray irradiation, radial ray irradiation, or corona discharge treatment to process the resin sheet into an electret resin sheet; and pulverizing the electret resin sheet.

A method for efficient dispatch/completion of a work element within a multi-node data processing system. The method comprises: selecting specific processing units from among the processing nodes to complete execution of a work element that has multiple individual work items that may be independently executed by different ones of the processing units; generating an allocated processor unit (APU) bit mask that identifies at least one of the processing units that has been selected; placing the work element in a first entry of a global command queue (GCQ); associating the APU mask with the work element in the GCQ; and responsive to receipt at the GCQ of work requests from each of the multiple processing nodes or the processing units, enabling only the selected specific ones of the processing nodes or the processing units to be able to retrieve work from the work element in the GCQ.

A system for protecting an electronic device against malware includes a memory, an operating system configured to execute on the electronic device, and a below-operating-system security agent. The below-operating-system security agent is configured to trap an attempted access of a resource of the electronic device, access one or more security rules to determine whether the attempted access is indicative of malware, and operate at a level below all of the operating systems of the electronic device accessing the memory. The attempted access includes attempting to write instructions to the memory and attempting to execute the instructions.

A method of reducing the downward flow of air currents on the leeward side of an emissions emitting structure including the step of using a system that includes components chosen from the group consisting of one or more mechanical air moving devices; physical structures; and combinations thereof to create an increase in the air pressure within a volume of air on the leeward side of an emissions emitting structure having emissions that become airborne. The increased air pressure prevents or lessens downward flow of emissions that would occur without the use of the system and increases the safety by which one can travel a road or other transportation route that might otherwise be visually obscured by the emissions and the safety of the property and those within the area where emissions occur.

An aqueous delivery system is described including at least one surfactant and at least one water insoluble wetting agent. Further described are low surface energy substrates, such as microporous polytetrafluoroethylene, coated with such an aqueous solution so as to impart a change in at least one surface characteristic compared to the surface characteristics of the uncoated low surface energy substrate.

A method and circuit arrangement utilize a low latency variable transfer network between the register files of multiple processing cores in a multi-core processor chip to support fine grained parallelism of virtual threads across multiple hardware threads. The communication of a variable over the variable transfer network may be initiated by a move from a local register in a register file of a source processing core to a variable register that is allocated to a destination hardware thread in a destination processing core, so that the destination hardware thread can then move the variable from the variable register to a local register in the destination processing core.

A method is disclosed which may include analyzing communication requests in a business process between a client and a server offering a service application to be tested. The method may further include identifying a call to a web service in the analyzed communication. The method may also include determining a location of a Web Service Description Language (WSDL) file relating to the web service on a remote server and downloading the WSDL file from the determined location. A computer readable medium having stored thereon instructions for performing the method and a computer system are also disclosed.

The present invention relates to a method for compiling code for a multi-core processor, comprising: detecting and optimizing a loop, partitioning the loop into partitions executable and mappable on physical hardware with optimal instruction level parallelism, optimizing the loop iterations and/or loop counter for ideal mapping on hardware, chaining the loop partitions generating a list representing the execution sequence of the partitions.

In one embodiment, an optimization hint may be included in a business process flow. An executable process may be generated from the business process flow where the optimization hint is included in the executable process. While executing the executable process, the runtime engine encounters an optimization hint and determines an optimization to perform. The optimization hint may be related to an aspect of a business process being orchestrated by the business process flow. The optimization is then performed while executing the executable process. For example, the runtime engine may start pre-processing the branch while the condition is being evaluated. If the condition evaluates such that the pre-processed branch should be executed, then the runtime engine has already started processing of that branch. The processing is thus optimized in that the runtime engine is not sitting idle while waiting for the condition to be evaluated.

Computer-implemented methods for analyzing computer programs written in semi-structured languages are disclosed. The method is based on unification of the two classic forms of program flow analysis, control flow and data flow analysis. As such, it is capable of substantially increased precision, which increases the effectiveness of applications such as automated parallelization and software testing. Certain implementations of the method are based on a process of converting source code to a decision graph and transforming that into one or more alpha graphs which support various applications in software development. The method is designed for a wide variety of digital processing platforms, including highly parallel machines. The method may also be adapted to the analysis of (semi-structured) flows in other contexts including water systems and electrical grids.

The present invention relates generally to client-server architectures for allowing generic upload and download functionality between a web application at a server and a client. One exemplary method includes sending a download/upload request to a web application at the server, where the download/upload request specifies at least one file to download/upload; receiving a transmission from the server; parsing the transmission to identify a download/upload command and an associated download/upload manifest, where the download/upload manifest includes executable code that, when executed on the client, will perform the download/upload of the at least one file.

The present invention relates to the energy efficient and selective extraction of dilute concentrations of C2-C6 alcohols from an aqueous solution using liquid phase dimethyl ether.

A power steering device is mounted on a vehicle and includes a variable transmission ratio mechanism, a torque applying unit, and an applied friction torque changing unit. The torque applying unit sets an applied friction torque applied to the steering wheel and performs a control of applying the applied friction torque to the steering wheel. The applied friction torque changing unit changes the applied friction torque based on the transmission ratio of the variable transmission ratio mechanism.

In an electric powered vehicle in which vehicle driving force for reverse running is produced by a traction motor, vehicle driving force is set by a product of a base value set at least based on an accelerator opening and an amplification factor. The amplification factor is set at k1=1.0 during reverse running (V1.0 at the start of reverse running (V≧0) depending on the vehicular speed. The vehicle driving force at the start of reverse running can thereby be made larger than the vehicle driving force after the start of reverse running at the same accelerator opening.

Methods for the design of microwave filters comprises comprising preferably the steps of inputting a first set of filter requirements, inputting a selection of circuit element types, inputting a selection of lossless circuit response variables, calculating normalized circuit element values based on the input parameters, and generate a first circuit, insert parasitic effects to the normalized circuit element values of the first circuit, and output at least the first circuit including the post-parasitic effect circuit values. Additional optional steps include: requirements to a normalized design space, performing an equivalent circuit transformation, unmapping the circuit to a real design space, performing a survey, and element removal optimization. Computer implement software, systems, and microwave filters designed in accordance with the method are included.